Price | RM629.00 RM674.00 |
Product SKU | BX1400U-MS |
Brand | APC |
Availability | In Stock |
Shipping Fee |
Malaysia
Starting from RM82.15
|
Quantity |
|
- Output power capacity : 700Watts / 1.4 kVA
- Max Configurable Power (Watts) : 700Watts / 1.4 kVA
- Nominal Output Voltage : 230V
- Output Frequency (sync to mains) : 50/60 Hz +/-1 Hz
- Output Frequency (not synced) : 50/60 Hz +/-1 Hz
- Topology : Line Interactive
- Waveform type : Stepped approximation to a sinewave
- Output Connections : (2) IEC 320 C13 (Battery Backup)
- Transfer Time : 8ms typical : 10 ms maximum
- Nominal Input Voltage : 230V
- Input frequency : 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections : IEC-320 C14, NEMA 5-15P
- Cord Length : 1.22meters
- Input voltage range for main operations : 150 - 280 V
- Number of Power Cords : 2
- Type of Input Protection Required : 3-pole breaker
- Maximum Input Current : 6.0A
- Input Power Factor at Full Load : 0.5
- Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Included Battery Modules : 1
- Typical recharge time : 8hour(s)
- Control panel : LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- Surge energy rating : 273Joules
- Data Line Protection : RJ-11 Modem/Fax protection
Overview:
BX1400U-MS Features
APC Back-UPS 1400VA, 230V, AVR, Universal and IEC Sockets
Automatic restart of loads after UPS shutdown : Automatically starts up the connected equipment upon the return of utility power.
Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Automatic Voltage Regulation (AVR) : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.
Resettable circuit breaker : Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Telephone dataline surge protection : Provides protection of connected equipment from power surges traveling on telephone lines.
USB connection : Use your PC to access additional power protection and management features for your UPS via a USB Port.
Battery and surge protected outlets : Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets : Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
LED status display : Quickly understand unit and power status with visual indicators.
Audible alarms : Provides notification of changing utility power and UPS power conditions
Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Battery-protected and surge-only outlets : Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Safety-agency approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Specification
- Output power capacity : 700Watts / 1.4 kVA
- Max Configurable Power (Watts) : 700Watts / 1.4 kVA
- Nominal Output Voltage : 230V
- Output Frequency (sync to mains) : 50/60 Hz +/-1 Hz
- Output Frequency (not synced) : 50/60 Hz +/-1 Hz
- Topology : Line Interactive
- Waveform type : Stepped approximation to a sinewave
- Output Connections : (2) IEC 320 C13 (Battery Backup)
- Transfer Time : 8ms typical : 10 ms maximum
- Nominal Input Voltage : 230V
- Input frequency : 50/60 Hz +/- 3 Hz (auto sensing)
- Input Connections : IEC-320 C14, NEMA 5-15P
- Cord Length : 1.22meters
- Input voltage range for main operations : 150 - 280 V
- Number of Power Cords : 2
- Type of Input Protection Required : 3-pole breaker
- Maximum Input Current : 6.0A
- Input Power Factor at Full Load : 0.5
- Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
- Included Battery Modules : 1
- Typical recharge time : 8hour(s)
- Control panel : LED status display with On Line : On Battery : Replace Battery and Overload indicators
- Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
- Surge energy rating : 273Joules
- Data Line Protection : RJ-11 Modem/Fax protection
- Maximum Height : 215mm , 21.5CM
- Maximum Width : 130mm , 13.0CM
- Maximum Depth : 336mm , 33.6CM
- Net Weight : 12.0KG
- Shipping weight : 12.94KG
- Shipping Height : 295mm , 29.5CM
- Shipping Width : 245mm , 24.5CM
- Shipping Depth : 440mm , 44.0CM
- Color : Black
- Operating Temperature : 0 - 40 °C
- Operating Relative Humidity : 0 - 95 (non-condensing) %
- Operating Elevation : 0-3000meters
- Storage Temperature : -15 - 45 °C
- Storage Relative Humidity : 0 - 95 (non-condensing) %
- Storage Elevation : 0-9000meters
- Audible noise at 1 meter from surface of unit : 45.0dBA
- Standard warranty : 2 years repair or replace
- RoHS : Compliant
- REACH : REACH: Contains No SVHCs
Model:
BX1400U-MS
Warranty:
2 years repair or replace - Carry-In warranty
What's in the box:
1 x APC Back-UPS 1400VA AVR 230V 4XUniversal 2XIEC BX1400U-MS - Black
Box Dimensions (CM) & Weight (KG):
50 x 30 x 20 cm & 14 (KG)
1 x APC Back-UPS 1400VA AVR 230V 4XUniversal 2XIEC BX1400U-MS - Black