RM639.00
APC Back-UPS 1400VA, 230V, AVR, Universal and IEC Sockets
Price RM639.00
Product SKU BX1400U-MS
Brand APC
Size (L x W x H) 50 cm x 30 cm x 20 cm
Availability In Stock
Shipping Fee
Quantity
Description
Highlight
  • Output power capacity : 700Watts / 1.4 kVA
  • Max Configurable Power (Watts) : 700Watts / 1.4 kVA
  • Nominal Output Voltage : 230V
  • Output Frequency (sync to mains) : 50/60 Hz +/-1 Hz
  • Output Frequency (not synced) : 50/60 Hz +/-1 Hz
  • Topology : Line Interactive
  • Waveform type : Stepped approximation to a sinewave
  • Output Connections : (2) IEC 320 C13 (Battery Backup)
  • Transfer Time : 8ms typical : 10 ms maximum
  • Nominal Input Voltage : 230V
  • Input frequency : 50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections : IEC-320 C14, NEMA 5-15P
  • Cord Length : 1.22meters
  • Input voltage range for main operations : 150 - 280 V
  • Number of Power Cords : 2
  • Type of Input Protection Required : 3-pole breaker
  • Maximum Input Current : 6.0A
  • Input Power Factor at Full Load : 0.5
  • Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Included Battery Modules : 1
  • Typical recharge time : 8hour(s)
  • Control panel : LED status display with On Line : On Battery : Replace Battery and Overload indicators
  • Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Surge energy rating : 273Joules
  • Data Line Protection : RJ-11 Modem/Fax protection

Overview:

BX1400U-MS Features

APC Back-UPS 1400VA, 230V, AVR, Universal and IEC Sockets

Automatic restart of loads after UPS shutdown : Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Automatic Voltage Regulation (AVR) : Automatically steps up low voltage and steps down high voltage to levels that are suitable for your equipment.

Resettable circuit breaker : Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Telephone dataline surge protection : Provides protection of connected equipment from power surges traveling on telephone lines.

USB connection : Use your PC to access additional power protection and management features for your UPS via a USB Port.

Battery and surge protected outlets : Back up and protect your hardware and data during power outages, surges and spikes.

Surge only outlets : Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.

LED status display : Quickly understand unit and power status with visual indicators.

Audible alarms : Provides notification of changing utility power and UPS power conditions

Intelligent battery management : Maximizes battery performance, life, and reliability through intelligent, precision charging.

Automatic self-test : Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification : Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Battery-protected and surge-only outlets : Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment

Safety-agency approved : Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 

Specification

  • Output power capacity : 700Watts / 1.4 kVA
  • Max Configurable Power (Watts) : 700Watts / 1.4 kVA
  • Nominal Output Voltage : 230V
  • Output Frequency (sync to mains) : 50/60 Hz +/-1 Hz
  • Output Frequency (not synced) : 50/60 Hz +/-1 Hz
  • Topology : Line Interactive
  • Waveform type : Stepped approximation to a sinewave
  • Output Connections : (2) IEC 320 C13 (Battery Backup)
  • Transfer Time : 8ms typical : 10 ms maximum
  • Nominal Input Voltage : 230V
  • Input frequency : 50/60 Hz +/- 3 Hz (auto sensing)
  • Input Connections : IEC-320 C14, NEMA 5-15P
  • Cord Length : 1.22meters
  • Input voltage range for main operations : 150 - 280 V
  • Number of Power Cords : 2
  • Type of Input Protection Required : 3-pole breaker
  • Maximum Input Current : 6.0A
  • Input Power Factor at Full Load : 0.5
  • Battery type : Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Included Battery Modules : 1
  • Typical recharge time : 8hour(s)
  • Control panel : LED status display with On Line : On Battery : Replace Battery and Overload indicators
  • Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Surge energy rating : 273Joules
  • Data Line Protection : RJ-11 Modem/Fax protection
  • Maximum Height : 215mm , 21.5CM
  • Maximum Width : 130mm , 13.0CM
  • Maximum Depth : 336mm , 33.6CM
  • Net Weight : 12.0KG
  • Shipping weight : 12.94KG
  • Shipping Height : 295mm , 29.5CM
  • Shipping Width : 245mm , 24.5CM
  • Shipping Depth : 440mm , 44.0CM
  • Color : Black
  • Operating Temperature : 0 - 40 °C
  • Operating Relative Humidity : 0 - 95 (non-condensing) %
  • Operating Elevation : 0-3000meters
  • Storage Temperature : -15 - 45 °C
  • Storage Relative Humidity : 0 - 95 (non-condensing) %
  • Storage Elevation : 0-9000meters
  • Audible noise at 1 meter from surface of unit : 45.0dBA
  • Standard warranty : 2 years repair or replace
  • RoHS : Compliant
  • REACH : REACH: Contains No SVHCs

 

Model:

BX1400U-MS

 

Warranty:

2 years repair or replace - Carry-In warranty

 

What's in the box:

1 x  APC Back-UPS 1400VA AVR 230V 4XUniversal 2XIEC BX1400U-MS - Black

 

Box Dimensions (CM) & Weight (KG):

50 x 30 x 20 cm & 14 (KG)

Reviews (0)
view all
back
0
0 reviews
What's in the box

1 x  APC Back-UPS 1400VA AVR 230V 4XUniversal 2XIEC BX1400U-MS - Black

Tags: double11